The length of a 1 kg spool of 1.75 mm diameter filament depends on the material’s density. For PLA, which has a density of approximately 1.25 g/cm³, a 1 kg spool contains about 330 meters of filament. For ABS, with … Continue reading →
I set up an IPSec VPN between a SRX300 and pfSense running on an x86_64 box SRX300 running JUNOS 22.4R3-S3.3 Internet 3.0.0.1/24 Inside/Office 10.9.6.1/24 pfSense running 2.7.2-RELEASE (amd64) WAN 2.0.0.1/24 LAN 10.9.169.1/24 pfSense Configuration Phase 1 IKE Endpoint Configuration Key … Continue reading →
M4 x 3 mm
Continue reading →I have a Comcast cable modem that is providing a IPv6 address that my Juniper SRX300 is binding to its outside interface. From the SRX I can successfully ping and ssh to various IPv6 devices on the Internet. Unfortunately I … Continue reading →
I found the best way to handle the certificate on a self hosted unifi controller was to switch to Lets Encrypt. Now, my unifi controller is behind a firewall, so we have to enable the DNS Challenge. We do this … Continue reading →
There are two main standards for power cables in the US, NEMA (National Electrical Manufacturers Association) and IEC (International Electrotechnical Commission). The following is a cross reference for some of the most common ones in use today. Nema … Continue reading →
A problem with Debian installs when you run apt update. To fix sudo vi /etc/apt/sources.list find the line that starts with deb cdrom: put a # at the start of the line now run sudo apt update have a nice … Continue reading →
3/4 cup all-purpose flour 1/4 cup cornstarch 1/2 teaspoon baking powder 1/4 teaspoon baking soda 1/2 teaspoon salt 1 cup whole milk or buttermilk (or a combination) 1/3 cup vegetable oil or melted butter … Continue reading →
service middlewared restart service nginx restart Ref: https://serverfault.com/questions/258584/how-to-restart-web-ui-on-freenas
Continue reading →Please note this is for organizations running a Speedtest Server from Ookla. Follow the instructions as indicated here. Where it discusses “Ensure server daemon starts automatically” do the following: create a file named /usr/lib/systemd/system/OoklaServer.service – replace OoklaDirectory with the full … Continue reading →