There are two different login messages. “login message” appears before you are prompted for your password. Example: set system login message “Go away before you log in!” “login announcement” is presented after you successfully enter your password. Example: set system … Continue reading →
Create a firewall filter to log and accept any packets that match the server’s IP address as the destination-address. set firewall filter SYSLOG_FILTER term SYSLOG_PACKETS from destination-address 192.0.2.5/32 set firewall filter SYSLOG_FILTER term SYSLOG_PACKETS from destination-port 514 set firewall … Continue reading →
Someone did not log out of their session while editing the configuration on the switch Entering configuration mode Users currently editing the configuration: root terminal d0 (pid 3112) on since 2023-04-05 02:18:53 CDT, idle 6w0d 05:47 {master:0}[edit] To clear the … Continue reading →
https://www.juniper.net/documentation/us/en/software/junos/qfabric-troubleshooting/cli/topics/task/system-storage-cleanup-qfx-series.html Clean up the file storage on the device by deleting system files. Request to delete system files. content_copy zoom_out_map user@host> request system storage cleanup The list of files to be deleted is displayed. content_copy zoom_out_map List of files to … Continue reading →
At times you will need to add dns domain suffix searches to be pushed down to your dhcp clients. The dns server will be using option 119 to do this. To set up option 119 on a Junos dhcp server … Continue reading →
I upgraded my EX2300-24P and got an alarm light on the front. root@switch> show system alarms 1 alarms currently active Alarm time Class Description 2021-06-19 04:20:46 EDT Minor RE 0 /var partition usage is high Then I ran “show system … Continue reading →
If you are running the UniFi Network application on a server that is on the same network segment with your Ubiqiti devices, all is good, but, if the devices are on a separate network segment (i.e. there is a router … Continue reading →
If you are using the DHCP server on an SRX (and this should apply to other Juniper products running Junos) you can set up time options for DHCP clients on your network Option 42 Option 42 NTP server – tell … Continue reading →
I needed a way to track if someone logged into the switches and made changes – when they made the changes and who did it First – I set up a logging server on Linux Then I added the following … Continue reading →
Install Software via CLI (Method 1 – from Junos software copied to SRX) Follow these steps to copy the software to the SRX device and then perform the software installation via the CLI: Copy software to SRX via SCP or FTP to … Continue reading →