First – add the following line: set system services dhcp-local-server requested-ip-interface-match Create a name for the pool and set the network. I named this pool CAMERAPOOL set access address-assignment pool CAMERAPOOL family inet network 10.9.5.0/24 Set the range of addresses … Continue reading →
set system processes general-authentication-service traceoptions file general_auth set system processes general-authentication-service traceoptions file size 100000 set system processes general-authentication-service traceoptions file files 10 set system processes general-authentication-service traceoptions flag all Clean up with clear log general_auth and file delete /var/log/general_auth … Continue reading →
Note: When you first start you may get a bunch of messages like these on the screen Auto Image Upgrade: DHCP Client Bound interfaces: Auto Image Upgrade: DHCP Client Unbound interfaces: ge-0/0/0.0 ge-0/0/7.0 Auto Image Upgrade: To stop, on CLI … Continue reading →
1) Reboot the box and press SPACE when you see the following screen to get to the loader prompt. writing to flash… Protected 1 sectors Loading /boot/defaults/loader.conf /kernel data=0x9f5c18+0xd8d68 syms=[0x4+0x7e350+0x4+0xb49c7] Hit [Enter] to boot immediately, or space bar for … Continue reading →
If you are running the UniFi Network application on a server that is on the same network segment with your Ubiqiti devices, all is good, but, if the devices are on a separate network segment (i.e. there is a router … Continue reading →
Install Software via CLI (Method 1 – from Junos software copied to SRX) Follow these steps to copy the software to the SRX device and then perform the software installation via the CLI: Copy software to SRX via SCP or FTP to … Continue reading →
jnxOperatingTemp.9.1.0.0 or 1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0 Settings for Nagios to monitor temperature on SRX using snmp v3 /usr/lib64/nagios/plugins/check_snmp -H 10.254.253.1 -o 1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0 -w 43 -c 45 -u C -P 3 -L authPriv -U SNMPUSERNAME -a MD5 -A AUTHPASS -x aes -X PRIVPASS SNMP … Continue reading →
A quick synopsis on setting up a Cisco ASA and a Centos 6 or 7 system to use SNMP v3 to be monitored by Cacti Cisco ASA en conf t # create a snmp-server group (needed for SNMP v3) # … Continue reading →
SNMP V1 and V2c set snmp location “Text String That Indicates Where This Is At” set snmp contact “usually@MyEmail.com” set snmp community MyCommunityString authorization read-only set snmp community MyCommunityString clients ip.addresses.allowed.access/24 set snmp community MyCommunityString clients moreip.addresses.allowed.access/24 SNMP V3 set … Continue reading →
If you are using J-Web on an SRX and want to select what the URL is to access J-Web use the following: system services web-management management-url booga The URL for J-Web will now be https://your.srx.fqdn.name/booga Tested on SRX300 running … Continue reading →