If you are running the UniFi Network application on a server that is on the same network segment with your Ubiqiti devices, all is good, but, if the devices are on a separate network segment (i.e. there is a router … Continue reading →
If you are using the DHCP server on an SRX (and this should apply to other Juniper products running Junos) you can set up time options for DHCP clients on your network Option 42 Option 42 NTP server – tell … Continue reading →
I have an application where I set up a Juniper EX-2300 as a layer 3 switch – but I needed DHCP Relay activated through the EX-2300 edit forwarding-options # enter your dhcp server(s) set dhcp-relay server-group DHCPSERVERS 10.9.6.254 # … Continue reading →
Create a name for the pool and set the network. I named this pool CAMERAPOOL set access address-assignment pool CAMERAPOOL family inet network 10.9.5.0/24 Set the range of addresses you are going to hand out via dhcp set access address-assignment … Continue reading →
I am adding a new VLAN to my network and I need my SRX to hand out IP addresses for that subnet. The vlan number I am using is 19. I am calling this network PUBLICVLAN Set up the irb … Continue reading →
Logon to the server. Click Start, point to All Programs, point to Administrative Tools, and then click DHCP. Right click on IPv4 and choose Set Predefined Options…. click the Add… button in the Predefined options window. Enter in the information … Continue reading →