Mikrotik snmp temperature
sys_temp .1.3.6.1.4.1.14988.1.1.3.10.0 cpu_temp .1.3.6.1.4.1.14988.1.1.3.11.0 fan .1.3.6.1.4.1.14988.1.1.3.9.0 MikroTik SwOS only supports spu temp
Continue reading →Tag Archives: snmp
systemstats_linux: unexpected header length in /proc/net/snmp. 237 != 224
There is a bug in some versions of snmp that cause the message systemstats_linux: unexpected header length in /proc/net/snmp. 237 != 224 to be posted to the logs. It is not an indication of a real problem. To prevent it … Continue reading →
Juniper SRX Routing Engine Temperature OID and Nagios
jnxOperatingTemp.9.1.0.0 or 1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0 Settings for Nagios to monitor temperature on SRX using snmp v3 /usr/lib64/nagios/plugins/check_snmp -H 10.254.253.1 -o 1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0 -w 43 -c 45 -u C -P 3 -L authPriv -U SNMPUSERNAME -a MD5 -A AUTHPASS -x aes -X PRIVPASS SNMP … Continue reading →
Juniper SNMP Settings
SNMP V1 and V2c set snmp location “Text String That Indicates Where This Is At” set snmp contact “usually@MyEmail.com” set snmp community MyCommunityString authorization read-only set snmp community MyCommunityString clients ip.addresses.allowed.access/24 set snmp community MyCommunityString clients moreip.addresses.allowed.access/24 SNMP V3 set … Continue reading →
refused smux peer: oid SNMPv2-SMI::enterprises.674.10892.1, descr Systems Management SNMP MIB Plug-in Manager
I had the following entry appear in the messages file every few seconds refused smux peer: oid SNMPv2-SMI::enterprises.674.10892.1, descr Systems Management SNMP MIB Plug-in Manager Based on my research, I found someone who said: More than likely a Dell … Continue reading →
SNMP v3 and Cacti
A quick synopsis on setting up a Cisco ASA and a Centos 6 or 7 system to use SNMP v3 to be monitored by Cacti Cisco ASA en conf t # create a snmp-server group (needed for SNMP v3) # … Continue reading →