If you are running the UniFi Network application on a server that is on the same network segment with your Ubiqiti devices, all is good, but, if the devices are on a separate network segment (i.e. there is a router … Continue reading →
If you are using the DHCP server on an SRX (and this should apply to other Juniper products running Junos) you can set up time options for DHCP clients on your network Option 42 Option 42 NTP server – tell … Continue reading →
You make an error in the configuration of your Juniper SRX and vpn stops working and you get the error message: error: the kmd instance kmd is not running So you execute: show system processes extensive | match kmd and … Continue reading →
First clear phase 1 (IKE): clear security ike security-associations then clear phase 2 (IPSEC): clear security ipsec security-associations First clear phase 2 (IPSEC): clear security ipsec security-associations index INDEX-NR then clear phase 1 (IKE): clear security ike … Continue reading →
I needed a way to track if someone logged into the switches and made changes – when they made the changes and who did it First – I set up a logging server on Linux Then I added the following … Continue reading →
First – add the following line: set system services dhcp-local-server requested-ip-interface-match Create a name for the pool and set the network. I named this pool CAMERAPOOL set access address-assignment pool CAMERAPOOL family inet network 10.9.5.0/24 Set the range of addresses … Continue reading →
To recover the root password: Power off the SRX by pressing the power button on the front panel. Turn off the power to the management device, such as a PC or laptop computer, that you want to use to access … Continue reading →
Install Software via CLI (Method 1 – from Junos software copied to SRX) Follow these steps to copy the software to the SRX device and then perform the software installation via the CLI: Copy software to SRX via SCP or FTP to … Continue reading →
Note: When you first start you may get a bunch of messages like these on the screen Auto Image Upgrade: DHCP Client Bound interfaces: Auto Image Upgrade: DHCP Client Unbound interfaces: ge-0/0/0.0 ge-0/0/7.0 Auto Image Upgrade: To stop, on CLI … Continue reading →
show security dynamic-vpn users example: root@srx-pes> show security dynamic-vpn users User: username , Number of connections: 1 Remote IP: 2.2.2.3 IPSEC VPN: DYN-VPN IKE gateway: DYN-VPN-LOCAL-GW IKE ID : usernamePESSRX IKE Lifetime: 28800 IPSEC Lifetime: 3600 Status: CONNECTED
Continue reading →