First – add the following line: set system services dhcp-local-server requested-ip-interface-match Create a name for the pool and set the network. I named this pool CAMERAPOOL set access address-assignment pool CAMERAPOOL family inet network 10.9.5.0/24 Set the range of addresses … Continue reading →
Install Software via CLI (Method 1 – from Junos software copied to SRX) Follow these steps to copy the software to the SRX device and then perform the software installation via the CLI: Copy software to SRX via SCP or FTP to … Continue reading →
Note: When you first start you may get a bunch of messages like these on the screen Auto Image Upgrade: DHCP Client Bound interfaces: Auto Image Upgrade: DHCP Client Unbound interfaces: ge-0/0/0.0 ge-0/0/7.0 Auto Image Upgrade: To stop, on CLI … Continue reading →
I am adding a new VLAN to my network and I need my SRX to hand out IP addresses for that subnet. The vlan number I am using is 19. I am calling this network PUBLICVLAN Set up the irb … Continue reading →
Assuming you backup your SRX every time you make a change (see here) , you may have a need one day to restore your settings. To do so root@srx# load replace scp://username:password@IP.Of.Backup.Server/path/NameOfConfigFileToLoad.conf.gz root@srx# commit Where: username is a username … Continue reading →
SNMP V1 and V2c set snmp location “Text String That Indicates Where This Is At” set snmp contact “usually@MyEmail.com” set snmp community MyCommunityString authorization read-only set snmp community MyCommunityString clients ip.addresses.allowed.access/24 set snmp community MyCommunityString clients moreip.addresses.allowed.access/24 SNMP V3 set … Continue reading →
You get your new Juniper switch configured, everything is working well then you notice the alarm light is on! Dont panic! First: Issue the command: root@switch> show system alarms and (hopefully) you will see one or more of the following: … Continue reading →
Below provides the basic commands for configuring the date, time and NTP on your Juniper Set the time either set date ntp or set date YYYYYMMDDHHMM Set the name servers set system name-server your.name.server.1 set system name-server your.name.server.2 commit Configure … Continue reading →
A quick synopsis on setting up a Cisco ASA and a Centos 6 or 7 system to use SNMP v3 to be monitored by Cacti Cisco ASA en conf t # create a snmp-server group (needed for SNMP v3) # … Continue reading →